Beeovita
Micropur Classic MC 1000F tekočina Fl 100 ml
Micropur Classic MC 1000F tekočina Fl 100 ml

Micropur Classic MC 1000F tekočina Fl 100 ml

Micropur Classic MC 1000F liq Fl 100 ml

  • 31.49 USD

    Prihranite 0 / 0%
Na zalogi
Cat. Z
Na voljo 14 kosov
Dodajte več za večje popuste!

Kupite 2 in prihranite -1.26 USD / -2%

Brez možnosti vračila/zamenljivosti.
Safe payments
Vrsta liq
Količina v paketu. 1

Opis

Composition

0.7 mg silver, per 1g.

Properties

Preserved clear (not cloudy) drinking water for up to 6 months. Has a bactericidal effect after 2 hours of contact time. Chlorine-free, odorless and tasteless. Can be used anywhere where drinking water stays in a system for a long time, i.e. in cooling circuits, heating circuits, air humidifiers, cisterns, water tanks, water baths, incubators, etc. Ideal for water conservation in boats, campers or caravans.

Application

Dose Micropur liquid into the empty or half-filled water container. Immediately fill the container with the desired amount of water. The resulting turbulence serves to mix Micropur Classic and water. Additional stirring is not necessary. If Micropur liquid is only added after the container has been filled, the water must be stirred so that the silver ions are evenly distributed. Wait for the reaction time (120 minutes). For use in tap water with drinking water quality.

Micropur Classic MC 1000F: 1ml per 10 liters, enough for 1000 liters

Micropur Classic MC 10000F: 1ml per 10 liters, enough for 10000 liters

Micropur Classic MC 100000F: 1ml per 10 liters, enough for 100000 liters

Composition

0.7 mg silver, per 1g.

Properties

Preserves clear (not cloudy) drinking water for up to 6 months . Has a bactericidal effect after 2 hours of contact time. Chlorine-free, odorless and tasteless. Can be used anywhere where drinking water stays in a system for a long time, i.e. in cooling circuits, heating circuits, air humidifiers, cisterns, water tanks, water baths, incubators, etc. Ideal for water conservation in boats, campers or caravans.

Application

Dose Micropur liquid into the empty or half-filled water container. Immediately fill the container with the desired amount of water. The resulting turbulence serves to mix Micropur Classic and water. Additional stirring is not necessary. If Micropur liquid is only added after the container has been filled, the water must be stirred so that the silver ions are evenly distributed. Wait for the reaction time (120 minutes). For use in tap water with drinking water quality.Micropur Classic MC 1000F: 1ml per 10 liters, enough for 1000 litersMicropur Classic MC 10000F: 1ml per 10 liters, enough for 10000 litersMicropur Classic MC 100000F: 1ml per 10 liters, enough for 100000 liters

Mnenja (0)

Beeovita
Huebacher 36
8153 Rümlang
Switzerland
Free
expert advice