micropur

Mostrando 1 a 1 de 1 (1 Páginas)

Micropur es una innovadora solución de conservación del agua que mantiene el agua potable limpia y libre de bacterias hasta por 6 meses. Esta fórmula sin cloro contiene 0,7 mg de plata por 1 g, lo que garantiza que sea inodora e insípida. Ideal para su uso en sistemas donde se almacena agua durante períodos prolongados, como en circuitos de refrigeración, embarcaciones y caravanas. Simplemente dosifique en su recipiente de agua, llénelo con agua y espere 2 horas para obtener una acción bactericida efectiva. Disponible en varios tamaños, es perfecto para mantener la calidad del agua tanto en el hogar como en el hobby. Fabricado en Suiza, Micropur es un ejemplo de la precisión suiza en soluciones de agua para la salud y la belleza.

Micropur classic mc 1000f líquido fl 100 ml

Código de producto: 2681613

Composition 0.7 mg silver, per 1g. Properties Preserved clear (not cloudy) drinking water for up to 6 months. Has a bactericidal effect after 2 hours of contact time. Chlorine-free, odorless and tasteless. Can be used anywhere where drinking water stays in a system for a long time, i.e. in cooling circuits, heating circuits, air humidifiers, cisterns, water tanks, water baths, incubators, etc. Ideal for water conservation in boats, campers or caravans. Application Dose Micropur liquid into the empty or half-filled water container. Immediately fill the container with the desired amount of water. The resulting turbulence serves to mix Micropur Classic and water. Additional stirring is not necessary. If Micropur liquid is only added after the container has been filled, the water must be stirred so that the silver ions are evenly distributed. Wait for the reaction time (120 minutes). For use in tap water with drinking water quality. Micropur Classic MC 1000F: 1ml per 10 liters, enough for 1000 liters Micropur Classic MC 10000F: 1ml per 10 liters, enough for 10000 liters Micropur Classic MC 100000F: 1ml per 10 liters, enough for 100000 liters Composition 0.7 mg silver, per 1g. Properties Preserves clear (not cloudy) drinking water for up to 6 months . Has a bactericidal effect after 2 hours of contact time. Chlorine-free, odorless and tasteless. Can be used anywhere where drinking water stays in a system for a long time, i.e. in cooling circuits, heating circuits, air humidifiers, cisterns, water tanks, water baths, incubators, etc. Ideal for water conservation in boats, campers or caravans. Application Dose Micropur liquid into the empty or half-filled water container. Immediately fill the container with the desired amount of water. The resulting turbulence serves to mix Micropur Classic and water. Additional stirring is not necessary. If Micropur liquid is only added after the container has been filled, the water must be stirred so that the silver ions are evenly distributed. Wait for the reaction time (120 minutes). For use in tap water with drinking water quality.Micropur Classic MC 1000F: 1ml per 10 liters, enough for 1000 litersMicropur Classic MC 10000F: 1ml per 10 liters, enough for 10000 litersMicropur Classic MC 100000F: 1ml per 10 liters, enough for 100000 liters ..

31.49 USD

Mostrando 1 a 1 de 1 (1 Páginas)

Beeovita
Huebacher 36
8153 Rümlang
Switzerland